The Guide to Assessment Validation and How to Validate Assessments

The Guide to Assessment Validation and How to Validate Assessments

Blog Article

RTOs have numerous responsibilities post-registration, including annual declarations, AVETMISS reporting, and ensuring marketing compliance. Among these tasks, validation often stands out as particularly challenging.

Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.

Validation involves verifying which areas of an RTO's assessment process are correct and highlighting where improvements are needed. Understanding its key components makes the task less intimidating.

According to Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and are conducted according to the Principles of Assessment and Rules of Evidence.

The standards require RTOs to perform two types of validation.

The first type of validation ensures that your RTO's assessment meets the requirements of the training package within your scope.

The second validation type ensures that assessments adhere to the principles of assessment and rules of evidence.

This suggests we perform validation both before and after the assessment. This article will concentrate on the first type—assessment tool validation.

Understanding the Two Types of Assessment Validation

Clarifying Assessment Validation

As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, known as pre-assessment validation, pertains to the first part of the clause, focusing on meeting all unit requirements and ensuring total workbook compliance.

On the other side, post-assessment validation pertains to the implementation, requiring Registered Training Organisations to adhere to the Principles of Assessment and Rules of Evidence.

Our focus here will be on assessment tool validation.

Conducting Assessment Tool Validation

Having outlined the two types of validation, it’s time to dive into assessment tool validation.

When Should You Conduct Assessment Tool Validation?

Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.

No need to wait for the next validation schedule in your 5-year cycle. Validate new resources immediately to ensure they’re suitable for students.

Nevertheless, this isn't the only reason to perform this type of validation. Conduct assessment tool validation also when you:

- update your resources
- you add new training products on scope
- course is reviewed by you against training product updates
- learning resources are identified by you as a risk during your risk assessment

The Australian Skills Quality Authority's risk-based approach means RTOs should carry out regular risk assessments. If students complain about learning resources, it's an ideal time for assessment tool validation.

Identifying Training Products for Validation

Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.

Getting Started with Assessment Tool Validation: Resources Needed

Learning Resources

To validate your assessment tools, you will need the complete set of your learning resources:

Mapping tool – the first document you should look at. It highlights which assessment items meet unit requirements, accelerating validation.

Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – check that there are sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.

Other related resources – such as checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are suitable for the assessment task and address unit requirements.

Validation Board

Clause 1.11 sets out the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs generally require all trainers and assessors to be involved, sometimes including industry experts.

As a group, your validation panel must possess:

Relevant vocational competencies and industry skills applicable to the unit being validated

Up-to-date knowledge and skills in vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or its updated version

Assessment validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool is advantageous for both the validation process and documentation. It aids in viewing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.

Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.

Principles of Assessment Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.

It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Instructions for Assessment Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Check?

As mentioned in our blog post Common Problems In Assessment Tools, it’s crucial that your assessment tools enable trainers to follow assessment principles and evidence rules.

Basic Principles of Assessment
Fairness – Is equal opportunity and access provided to everyone in the assessment process?

Flexibility – Does the assessment offer multiple ways to show competence according to different needs and preferences?

Validity – Is the assessment measuring what it is supposed to measure? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment achieve the same results every time, regardless of who conducts the training? Will different assessors consistently make decisions on skill competence?

Key Rules of Evidence

Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool ensure that the work belongs to the candidate?

Currency – Do the assessment tools correspond to current units of competency and industry practices?

Although these are frequently covered in VET website professional development and nationally recognised training, many tools still struggle to meet these requirements.

To prevent employing learning resources that miss some unit requirements, be sure to follow these guidelines:

Practice What You Preach

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Carry out each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:

diaper change

bottle preparation, feeding babies from bottles, and cleaning equipment

prepare solid food and feed infants

appropriately respond to infant signs and cues

settle infants for sleep and prepare them

monitor and foster physical exploration and gross motor skills appropriate for the age

Getting students to describe changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby is not sufficient.

Complete or Not Competent

Pay attention to lists. Again, as illustrated above, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be Clearer

Each assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What information can be included in a work package?

Answers may include:

Compulsory resources

Appropriate costs

Length of activities

Appointed roles and responsibilities

If an assessment item requires multiple answers, specify how many answers are needed from a student. This ensures your assessment is reliable, and the evidence obtained is valid.

The same applies to assessment items with double-barrelled questions or questions that ask for more than one answer simultaneously. These can confuse both students and assessors, as illustrated in the example below:

Identify a hazard and/or environmental concern in the work area and select the most effective hazard control hierarchy.

Possible answers can include, but are not limited to:

Weather conditions – isolating the work area, engineering controls, PPE

Work area and ground conditions – elimination, isolation, use of engineering controls

People – isolating, use of engineering controls, administration

Structural hazards – substituting, isolation, engineering

Chemical hazards – isolation, engineering controls, administrative controls

Equipment or machinery – isolation, engineering, administration

Avoiding double-barrelled questions makes it easier for students to answer and for assessors to judge competence accurately.

Given these requirements, you might think, “Don’t learning resource developers provide audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This impacts your compliance history, so it’s wiser to take the safe and compliant route.